Best Price Porter Cable 9750. Free Shipping. Buy Now!.
Read more Porter-Cable 9750 Tiger Saw 11.5 Amp Reciprocating Saw with Variable Angle
I had to buy this saw to replace one (the same model) that fell off a roof. It is a lot more expansive than most saws but when you need to get in those tight spots you can't beat it.
This a awesome machine lots power!With the two swivels heads it can get into some tight spots! Fast shipping too !
This will definely get in those tight places that other sawzalls won't. I got mine at HD for $99. They had it for months at that price but no more (this was several years ago). Anyway, I have only used it to remodel one house, not heavy usage by any means. Recently, the gearing tore up inside and it stopped reciprocating. I took it apart and it would be a simple part to replace but I have looked and looked at online parts sites and cannot find it. I have had to get parts for other Porter Cable tools so I know they are out there. It just burns me up to scrap a $200 saw for the lack of a $20 part. Porter Cable's site is a joke. No help for parts there. Hope you never have to look on their site for parts or service. Another reviewer said that this is jerky. That is true, too. It will jerk you around and is tiring using for long. I have a lot of different brands of tools (Delta, Makita, Bosch, Ridgid) and Porter Cable is the only brand I have ever had to get replacement parts for, other than maintenance type things. I liked the saw all in all and would buy another for $99, but for $216, I'll pass. It didn't last long enough and like the other guy said, it's nice to have for those few times when you need the variable angle but mostly a cheaper, regular sawzall will work better.
Absolutely a great tool. No problems with the gears with the adjustable head, which were a concern for me. Get's into those tight places and does a great job. Friends use it a lot!!!
As I am a professional handyman/remodeller, I'll use a reciprocating saw several times in my typical week. I purchased my Porter-Cable 9750 from this site about five months ago and by now I have used it for many common tasks such as demolition, hole cut-out and edge trim-off, pick-up framing, pipe cutting (all kinds), and much more.
Before owning this saw I owned an orbital-action Milwaulkee Sawzall which I broke after 3 years of use (and abuse). I was swayed to purchase the Porter-Cable by the glowing reports of 'impossible' angles you could cut (see reviews below). Several times a year, I would run into just the sort of cutting problem this baby seemed designed for. I just couldn't wait to give it a try!
Well, by now, I've found the saw has much-too-much 'chatter' to ever be pleasant to use. Even in its 'straight-body' (normal) orientation the saw uncomfortably vibrates in your hand, and the neck feels 'too wide' to hold securely for long periods (in my admittedly small hand). When you twist the nose to get the odd-angle cut the vibration goes from 'not so good' to just plain 'pretty bad'. In my 5 months of using it I have *always* found it difficult to start any cut cleanly. To do so I've often had to resort to hand-sawing a pilot groove - something I just hardly ever needed to do with my Sawzall.
Demolition work is a drag with this saw. Due to the vibration and relative nose-heavy feel 2 hours with it will tire you as much as 6 with a Sawzall.
Don't want to make a deep cut? Usually you put in a short blade and extend the shoe. But the shoe extension in the Porter-Cable is pathetic (just over 1") - about half of what a Sawzall's extension will do (that one is too short also, just much less so).
I don't like the Porter-Cable's plastic case as much as Milwaulkee's either. Oh it's sturdy enough, but there is not as much room inside for the power cord, extra blades, or what have you.
And finally, what about that vaulted odd-angle cut feature? Well I found that many of the odd-angle cuts I wanted to make I couldn't, even though I did manage to get the saw positioned. Whenever I was reaching out and could not use both hands firmly on the saw the rough startup action would cause the blade to just jump & poke all over the place - completely useless. That said, there were some cuts I made which did save me 1/2 to 1 hour (or more) of time vs. the alternate (manual) approaches.
Would I buy the saw again? Not likely. If I had money for only one recpricating saw, I would definately NOT buy this one, but instead go back to my familiar Milwaulkee Sawzall. Using an uncomfortable saw 100% of the time just because 2% of the time I might need it's special feature doesn't make sense to me. On the other hand, if I already had a conventional reciprocating saw and found that I -- repeatly -- was needing that odd-angle feature, then I would buy it again.
I bought this saw after turning my shoulder to jelly trying to remove a roll cage from '69 Chevelle by hand. (turning it back into a street car). Only reason I bought this saw was for the variable angle head. It worked great and I was able to remove the entire cage even under the body where the cage attatched to the frame.
Destroyed about 10 blades but it cuts like butter and had plenty of power. Can't wait to use it on wood since the chrome-moly didn't slow it down. Bought mine at Lowes on sale for $179.00
I had planned on buying a Milwaukee Sawzall because of the reputation that they had for being the smoothest running. The Amazon reviews on these saws, however, have lately been indicating a slip in their quality control -- a lot of burned out machines. I was searching for alternatives when I came across the Variable Angle Tiger Saw. I loved the idea of a pivoting head. I wanted to look at one before I ordered, so I called around to see who had them locally. Lowe's were selling them for a Ben Franklin and a half. How could I go wrong at that price. I took it home and tried it out. The reviews here are spot on. The variable head is an engineering marvel. Congrats Porter-Cable on a well-thought-out design. There is one problem with the saw, though. It shakes like crazy. I mean it SHAKES! Just cutting through one 2x4 was enough to make me want to pack it up and take it right back to the store and buy a Sawzall. But then I got to looking at the big picture. The tiger saw was less money, which was good, but not my main motivation. What did I actually want a recip saw for in the first place? Nothing, really -- other than that occasional time that pops up when no other saw will work. So, for me, the ability to manipulate the head to get around a corner and cut a stubborn piece outweighed the fact that Milwaukee makes a smoother-running machine. This Tiger Saw will get in places that another recip saw will not. For that reason, and that reason alone, I will keep this saw. If I had to use this saw all day, or every day, I definitely would get rid of it. Your hands will be numb from shaking after the first 2 minutes. If you're only going to pull this saw out when it is the only saw left that will complete the job, then this saw is worth purchasing. I'd give the variable angle head 5 stars, but the balance of the machine 1 star. Overall, I'll give it 3 stars because I felt I got a good value at the price I paid.
I bought this saw about 2 years ago shortly after it was introduced. I normally don't buy a first generation tool, but I gambled on this one. So far, absolutely no regrets! If you do repair or remodeling work, you need to have this saw. I've contorted this saw into every conceivable configuration and it hasn't let me down yet! Blade change is easy and very secure. The only two minor drawbacks are a touchy trigger and above-normal vibration (which may be attributed to the odd work angles). I still highly recommend it, though.
Great power, balance, and versatility. Please note: this is a professional grade tool. It can be hard to handle, and tiring to hold. If you have the strength to use it, it is great.
I thought I'd use this tool for simple framing demolition. But, I ordered the optional jigsaw blade attachment ($8.00 for six blade inserts) and used the smaller blades to cut in places that the regular blades or a jigsaw wouldn't fit! Then using the regular blades, I've trimmed olive trees, cut copper tubing, trimmed deck planks, and cut framing and siding on wood,plastic, vinyl and metal siding. This is the most verstile saw I've ever used.
Images ScreenShot
About Porter-Cable 9750 Tiger Saw 11.5 Amp Reciprocating Saw with Variable Angle detail
Features
Related Product
Source From Best Price Porter Cable 9750 Tiger For Sale Best Buy Porter Cable 9750 Tiger Low Price Buy Cheap amp Review
Have a COOL !
Cheers
No comments:
Post a Comment